Intelligent sterilization and heat preservation function
Heat retention duration: 6 hours ≥ 64 ° C, 12 hours ≥ 52 ° C, 24 hours ≥ 40 ° C after injection of boiled water
Intelligent sterilization and cold insulation function
Cold insulation duration: 6 hours ≤ 14 ° C, 12 hours ≤ 19 ° C, 24 hours ≤ 21'C
Intelligent display of water temperature
Gently touch the bottle cap, and the screen displays the water temperature in the cup.
Intelligent UV deep UV cleaning and sterilization
UV-CLED can sterilize empty bottles or drinks in bottles. Press the bottle cap for 5 seconds, the red light will turn on, and the sterilization function will be turned on. The red light will turn off after 2 minutes of sterilization, and the sterilization is completed.
Note: UV-CLED is not a water purification system and does not have filtration function. When using, please ensure that the drinks in the cup are clean and drinkable. Since ultraviolet rays cannot penetrate dark or opaque liquids, sterilization effect cannot be achieved with this function. If the water cup is higher than 60 ° C, the UV function cannot be turned on.
Automatic protection function to avoid injury to human body
When the bottle cap is opened in the uncapping state or in the cleaning process, the bottle cap will automatically enter the safety mode to prevent ultraviolet rays from harming the human body.
Note: If the safety mode fails due to improper operation, please do not look directly at the ultraviolet ray to avoid eye and skin irritation or potential harm.
Smart sterilizing cup charging
Android smart charging socket, plug and charge, insert the charging terminal into the charging port of the bottle cap, the red charging indicator lights up, the water cup starts charging, and the green light is displayed when charging is completed.
